BALLY / WILLIAMS WPC 89


Rottendog is the manufacturer of replacement boards for your pinball machine.

Williams WPC89 /S Driver Board - WDB089

WDB089 - Driver Board compatible with Williams WPC89 and WPC-S pinball games.  The boards that this replaces are Bally / Williams part numbers A-12697-1, A-12697-3, and A-12697-4.

NEW:
With version 4 of this board, you will never get +5V resets!
We have swaped out the +5V Regulator with a 92% efficient switching regulator

See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board.  

Key Benefits:
- Superior +5V Low Drop Out (LDO) regulation for operation at lower line voltages
- Inrush current into power supply capacitors reduced for longer supply life
- Simplified solenoid driver design using FET technology with oversized transistors
- Discrete diodes replace bridge rectifiers for ease of troubleshooting and reduction in heat
- Test points and LEDs added for all voltages generated on the board
- Test point locations put into one location and clearly marked for easier troubleshooting
- All new (not 15+ year old) components and PCB

Game Listing:
Addams Family / Addams Family Gold / Black Rose / Corvette / Creature Black Lagoon / Demolition Man / Dirty Harry / Dr. Who / Dracula / Fish Tales / Flintstones / Funhouse / Gilligan's Island / Harley Davidson / Hurricane / Indiana Jones / Indianapolis 500 / Jackbot / Johnny Mnemonic / Judge Dredd / No Fear / Party Zone / Popeye / RoadShow / Slugfest / Star Trek Next Generation / Terminator 2 - Supported ONLY with boards built after Feb 2012 / The Getaway / The Machine BOP / The Shadow / Theater of Magic / Twilight Zone / WhiteWater / Who Dunnit / World Cup Soccer '94

€329,-
Buy 

Williams WPC89 MPU Board
- MPU089

MPU089- This board is a plug and play replacement for the original  Bally / Williams WPC089  MPU processor board.  The original MPU board that this board replaces is Bally / Williams part number A-12742-xx (where xx is the game number).

Key Benefits Over Original / Replacement Boards:
- Remote battery holder (no future acid damage).
- ZERO surface mount components.  This is not a throw away board.  We ONLY do Through-Hole Designs
- No custom components.
- Socketed through hole connector for RAM Chip.
- All new (not 20+ year old) components and PCB
- All of our components match the original schematic component designators, so you can troubleshoot with the original schematics or our schematics!

Note:
Most of our distributors offer this board without game ROM, ASIC and Microprocessor.  This is done to keep the price of the board as low as possible.  The Game ROM, ASIC and Microprocessors rarely go bad and are socketed so they can be moved from the original board to our board with minimum of effort.  Please check with the distributor you choose to see which chips you may need to move!  Call us direct if this confuses you.

This board is a drop in replacement for the following Bally / Williams Pinball Games:
Addams Family / Addams Family Gold / Black Rose / Creature From the Black Lagoon / Demolition Man / Dr. Dude / Dr. Who / Dracula / Fish Tales / Funhouse / Getaway / Gilligan's Island / Harley Davidson / Hurricane / Indiana Jones / Judge Dredd / Machine Bride of Pinbot, The / Party Zone / Popeye / Star Trek, The Next Generation / Slugfest / Terminator 2 / The Machine, Bride of Pinbot / Twilight Zone / White Water

MPU089 - €195,-
Buy 
MPU089 + Microprocessor € 214,-
Buy
MPU089 + ASIC € 234,-
Buy
MPU089 + Microproccessor + ASIC € 253,-
Buy

Williams WPC89 - S MPU Board- MPUSEC

MPUSEC- This board is a plug and play replacement for the original  Bally / Williams WPC-S Security  MPU processor board.  The original MPU board that this board replaces is Bally / Williams part number A-17651-xx (where xx is the game number).

 Key Benefits Over Original / Replacement Boards:
- Remote battery holder (no future acid damage).
- ZERO surface mount components.  This is not a throw away board.  
- No aftermarket custom components.
- Socketed through hole socket for RAM Chip.
- All new (not 20+ year old) components and PCB
- All of our components match the original schematic component designators, so you can troubleshoot with the original schematics or our schematics!

Note:
Most of our distributors offer this board without game ROM, ASIC, Security Chip and Microprocessor.  This is done to keep the price of the board as low as possible.  The Game ROM, ASIC and Microprocessors rarely go bad and are socketed so they can be moved from the original board to our board with minimum of effort.  Please check with the distributor you choose to see which chips you may need to move!  Call us direct if this confuses you.

This board is a drop in replacement for the following Bally / Williams Pinball Games:
Corvette / Dirty Harry / Indianapolis 500 / Jack-Bot / Johnny Mnemonic / No Fear / Red & Ted’s Road Show / The Flintstones / The Pinball Circus / The Shadow / Theatre of Magic / WHO Dunnit / World Cup Soccer

€195,-
Buy 
MPUSEC + Microprocessor € 214,-
Buy
MPU089 + ASIC € 234,-
Buy
MPU089 + Microproccessor + ASIC € 253,-
Buy

Williams WPC DMD Driver Board - DMD089

DMD089 - Dot Matrix Driver Board compatible with Williams WPC89 and WPC-S pinball games.  The board that this replaces is Bally / Williams part numbers A-14039 (all versions).

See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board.  

The high voltages produced by this board are nominally set for -120V, -106V and +64V.  These voltages can be adjusted but you would need to change resistor values!

Key Benefits:
- Redesigned / simplified high voltage section which eliminates high temperature circuit board burn.  This board will NOT burn up the way the original board does!
- LEDs added for visual verification of +5VDC
- Test point locations centralized into one location and clearly marked for easier troubleshooting
- All new (not 15+ year old) components and PCB

Game Listing:
Addams Family / Addams Family Gold / Black Rose / Corvette / Creature From the Black Lagoon / Demolition Man / Dirty Harry / Dr. Who / Dracula / Fish Tales / Flintstones / Funhouse / Gilligan's Island / Harley Davidson / Hurricane / Indiana Jones / Indianapolis 500 / Jackbot (DMD Version Games Only) / Johnny Mnemonic / Judge Dredd / No Fear / Party Zone / Popeye / Road Show / Slugfest / Star Trek the Next Generation / Terminator 2 / The Getaway / The Machine BOP / The Shadow / Theater of Magic / Twilight Zone / White Water / Who Dunnit / World Cup Soccer '94 

€115,-
Buy 

Twilight Zone Clock Board
- CLK001

CLK001 - This is a direct plug in replacement for the original Twilight Zone clock board.  The original clock board is Bally / Williams part numbers A-16220 and A-16219.

Key Benefits:
- Hot burning bulbs replaced with cool burning LED's
- Single board construction eliminates board-2-board contact issues
- All new (not 15+ year old) components and PCB 

€95,-
Buy 

Williams Fliptronics 2 Flipper Board - FLP892

FLP892 - Williams WPC89 and WPC-S Fliptronics II Flipper board.  The boards that this replaces are Williams part numbers A-15472 and A-

See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board.  

Key Benefits:
- Simplified solenoid driver design using FET technology with oversized transistors
- All new (not 15+ year old) components and PCB
- Silk screen clearly outlining components and jumper purposes

Game Listing:
Addams Family - Click here for Fliptronic I installation picture / Black Rose / Corvette / Creature Black Lagoon / Demolition Man / Dirty Harry / Dr. Who / Dracula / Fish Tales / Flintstones / Gilligan's Island / Hurricane / Indiana Jones / Indianapolis 500 / Jackbot / Johnny Mnemonic / Judge Dredd / No Fear / Popeye / RoadShow / Star Trek Next Generation / Terminator 2 / The Getaway / The Shadow / Theater of Magic / Twilight Zone / WhiteWater / Who Dunnit / World Cup Soccer '94

€85,-
Buy 

Williams 8 Driver Board 
- WDB008

WDB008 - Supplemental Williams Driver Board compatible used on some Williams WPC89 pinball games.  The boards that this replaces are Williams part numbers A-16100-01 and A-16100-2.

See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board.

Key Benefits:
- Simplified solenoid driver design using FET technology with oversized transistors
- All new (not 15+ year old) components and PCB
- Simplified 11 separate jumpers down to only ONE!
- Silk screen clearly outlining components and jumper purposes

The jumper SW4 replaces the 11 separate jumpers on the original board.  Order for the board for your specific game to insure plug and play operation, or order with jumper SW4 in (WDB008-1) and only remove jumper when installing into Demolition Man or Road Show.

Game Listing:
Demolition Man (DM) / Indiana Jones (IJ) / Road Show (RS) / Star Trek The Next Generation  (STTNG) / Twilight Zone (TZ)

€55,-
Buy 

Williams Type 2 Flipper Board
- FLP001

FLP001 - This is a newly designed and manufactured direct plug in replacement for the original Bally / Williams Type 2 flipper board. The original Type 2 Flipper Board is Bally / Williams part number xxx-xxxx-xxx

Key Benefits:
- All new (not 15+ year old) components and PCB

This board is a drop-in replacement for the following Bally and Williams Pinball Games:
Attack from Mars / Cactus Canyon / Championship Pub / Circus Voltaire / Congo / Corvette / Demolition Man / Dirty Harry / Flintstones / Indiana Jones / Indianapolis 500 / Jackbot / Johnny Mnemonic / Judge Dredd / Junkyard / Medieval Madness / Monster Bash / NBA Fastbreak / No Fear / No Good Gofers / Popeye / Roadshow / Safe Cracker / Scared Stiff / Shadow / Star Trek the Next Generation / Tales of the Arabian Nights / Theatre of Magic / Who Dunnit / World Cup Soccer '94

€22,50
Buy 

Williams WPC AN Display
- DIS089

DIS089 - This board set replaces William's display part number Dxxxxx. It is made from an advanced LED technology that was not available when the original boards were made by Williams.   We spent quite a bit of time matching the original color and brightness and are quite happy with the results.

Our boards are plug-and-play compatible with the original board set. No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".

Benefits over original Williams displays (and other replacement boards):
- No High Voltage Required!  These will operate with a defective +/- 100V power supply
- Boards use 100% through-hole electronic components!
- No Fragile Gas Display!   This light weight LED display should last 10X longer than original displays
- Simple design ( 7 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors (no custom IC's!)
- LEDs are made with black face to help in visual aesthetics when machine is not on
- Board comes with complete set of schematics.

Game Listing
Bride of Pinbot
Funhouse
The Machine

€179,-
Buy