Tweet

Pinball Driver Board compatible with Williams WPC95 pinball games.  The board that this replaces is Bally / Williams part number A-20028 .
See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board. 

Key Benefits
- Superior +5V Low Drop Out (LDO) regulation for operation at lower line voltages
- Simplified solenoid driver design using FET technology with oversized transistors
- Test points and LEDs added for all voltages generated on the board
- Test point locations put into one location and clearly marked for easier troubleshooting
- Normal sized fuses used to eliminate smaller original sized fuses.
- Same component designators used to allow troubleshooting from original schematics (schematics supplied with purchase).
- All new (not 15+ year old) components and PCB

Game Listing
Attack from Mars, Cactus Canyon, Champions Pub, Cirqus Voltaire, Congo, Junkyard, Medieval Madness, Monster Bash, NBA Fastbreak, No Good Gofers, Safe Cracker, Scared Stiff, Tales of the Arabian Nights, Ticket Tac Toe.

WBD095  -  EUR 265

this product is in stock

This board is a plug and play replacement for the original  Bally / Williams WPC095  MPU processor board. The original MPU board that this board replaces is Bally / Williams part number A-20119-xx (where xx is the game number).

Key Benefits
- Remote battery holder (no future acid damage).
- ZERO surface mount components.  This is not a throw away board.  We ONLY do Through-Hole Designs
- No custom components.
- Socketed through hole connector for RAM Chip.
- All new (not 15+ year old) components and PCB
- All of our components match the original schematic component designators, so you can troubleshoot with the original schematics or our schematics!

Game Listing
Attack from Mars, Cactus Canyon, Champions Pub, Cirqus Voltaire, Congo, Junkyard, Medieval Madness, Monster Bash, NBA Fastbreak, No Good Gofers, Safe Cracker, Scared Stiff, Tales of the Arabian Nights, Ticket Tac Toe.

MPU095  -  EUR 169
(incl. ASIC & microprocessor EUR 189)

this product is in stock

Levering

Excl. ASIC & microprocessor 169,00 EUR Incl. ASIC & microprocessor 189,00 EUR

This board is a plug and play replacement for the original  Bally / Williams WPC095  Audio/Video board. The original  board that this board replaces is Bally / Williams part number A-xxxxx-xx (where xx is the game number).

Key Benefits
- Redesigned High Voltage section.  No more burnt boards.
- Test points added for all voltages generated on the board
- Same component designators used to allow troubleshooting from original schematics (schematics supplied with purchase).
- All new (not 15+ year old) components and PCB

Game Listing
Attack from Mars, Cactus Canyon, Champions Pub, Cirqus Voltaire, Congo, Junkyard, Medieval Madness, Monster Bash, NBA Fastbreak, No Good Gofers, Safe Cracker, Scared Stiff, Tales of the Arabian Nights, Ticket Tac Toe.

WAV095  -  EUR 229

this product is in stock

Driver Board compatible with Williams WPC89 and WPC-S pinball games.  The boards that this replaces are Bally / Williams part numbers A-12697-1, A-12697-3, and A-12697-4.
See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board. 

Key Benefits
- Superior +5V Low Drop Out (LDO) regulation for operation at lower line voltages
- Inrush current into power supply capacitors reduced for longer supply life
- Simplified solenoid driver design using FET technology with oversized transistors
- Discrete diodes replace bridge rectifiers for ease of troubleshooting and reduction in heat
- Test points and LEDs added for all voltages generated on the board
- Test point locations put into one location and clearly marked for easier troubleshooting
- All new (not 15+ year old) components and PCB

Game Listing
Addams Family, Addams Family Gold, Black Rose, Corvette, Creature Black Lagoon, Demolition Man, Dirty Harry, Dr. Who, Dracula, Fish Tales, Flintstones, Funhouse, Gilligan's Island, Harley Davidson, Hurricane, Indiana Jones, Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd, No Fear, Party Zone, Popeye, RoadShow, Slugfest, Star Trek Next Generation, Terminator 2, The Getaway, The Machine BOP, The Shadow, Theater of Magic, Twilight Zone, WhiteWater, Who Dunnit, World Cup Soccer '94

WBD089  -  EUR 265

this product is in stock

Dot Matrix Driver Board compatible with Williams WPC89 and WPC-S pinball games.  The board that this replaces is Bally / Williams part numbers A-14039 (all versions).
See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board. 
The high voltages produced by this board are nominally set for -120V, -106V and +64V.  These voltages can be adjusted but you would need to change resistor values!

Key Benefits
- Redesigned / simplified high voltage section which eliminates high temperature circuit board burn.  This board will NOT burn up the way the original board does!
- LEDs added for visual verification of +5VDC
- Test point locations centralized into one location and clearly marked for easier troubleshooting
- All new (not 15+ year old) components and PCB

Game Listing
Addams Family, Addams Family Gold, Black Rose, Corvette, Creature Black Lagoon, Demolition Man, Dirty Harry, Dr. Who, Dracula, Fish Tales, Flintstones, Funhouse, Gilligan's Island, Harley Davidson, Hurricane, Indiana Jones, Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd, No Fear, Party Zone, Popeye, RoadShow, Slugfest, Star Trek Next Generation, Terminator 2, The Getaway, The Machine BOP, The Shadow, Theater of Magic, Twilight Zone, WhiteWater, Who Dunnit, World Cup Soccer '94

DMD089 - EUR 89 

this product is in stock

This board is a plug and play replacement for the original  Bally / Williams WPC089  MPU processor board. The original MPU board that this board replaces is Bally / Williams part number A-12742-xx (where xx is the game number).

Key Benefits
- Remote battery holder (no future acid damage).
- ZERO surface mount components.  This is not a throw away board.  We ONLY do Through-Hole Designs
- No custom components.
- Socketed through hole connector for RAM Chip.
- All new (not 20+ year old) components and PCB
- All of our components match the original schematic component designators, so you can troubleshoot with the original schematics or our schematics!

Game Listing
Addams Family, Addams Family Gold, Black Rose, Creature Black Lagoon, Demolition Man, Dr. Dude, Dr. Who, Dracula, Fish Tales, Funhouse, Gilligan's Island, Harley Davidson, Hurricane, Indiana Jones, Judge Dredd, Party Zone, Popeye, Slugfest, Star Trek Next Generation, Terminator 2, The Getaway, The Machine BOP, Twilight Zone, WhiteWater.

MPU089  -  EUR 155
(incl. ASIC & microprocessor EUR 175)

this product is in stock soon

Levering

Excl. ASIC & microprocessor 155,00 EUR Incl. ASIC & microprocessor 175,00 EUR

The boards that this replaces are Williams part numbers A-15472 and A-
See game listing below to see the specific game titles that this board supports.
This board is a direct plug in replacement for the original OEM driver board. 

Key Benefits
- Simplified solenoid driver design using FET technology with oversized transistors
- All new (not 15+ year old) components and PCB
- Silk screen clearly outlining components and jumper purposes

Game Listing
Black Rose, Corvette, Creature Black Lagoon, Demolition Man, Dirty Harry, Dr. Who, Dracula, Fish Tales, Flintstones, Gilligan's Island,  Hurricane, Indiana Jones, Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd, No Fear, Popeye, RoadShow, Slugfest, Star Trek Next Generation, Terminator 2, The Getaway, The Shadow, Theater of Magic, Twilight Zone, WhiteWater, Who Dunnit, World Cup Soccer '94

FLP892 - EUR 69

this product is in stock

Supplemental Williams Driver Board compatible used on some Williams WPC89 pinball games.  The boards that this replaces are Williams part numbers A-16100-01 and A-16100-2 See game listing below to see the specific game titles that this board supports. This board is a direct plug in replacement for the original OEM driver board. 

Key Benefits
- Simplified solenoid driver design using FET technology with oversized transistors
- All new (not 15+ year old) components and PCB
- Simplified 11 separate jumpers down to only ONE!
- Silk screen clearly outlining components and jumper purposes
Look at the picture to the left.  The jumper SW4 replaces the 11 separate jumpers on the original board.  Order for the board for your specific game to insure plug and play operation, or order with jumper SW4 in (WDB008-1) and only remove jumper when installing into Demolition Man or Road Show.

Game Listing
Demolition Man (DM), Indiana Jones (IJ), Road Show (RS), Star Trek The Next Generation (STTNG), Twilight Zone (TZ).

WBD008 - EUR 45

this product is in stock

This completely redesigned board replaces Williams System 11A & 11B  MPU / Driver Boards  part number D-11883-xxx (where xxx is the game number).
Our boards are plug-and-play compatible with the original board set.  No special tools or mounting tricks are required and the swap can be done by even the most novice of "installers".

Benefits over the original Williams board
- Williams WPC type mounting holes for ease of install / uninstall.
- No batteries required for memory retention (no acid damage, ever!)
- Simplified driver design using logic level FETs
- Beefed up switch matrix drive for better durability (good to 100V back drive)

In addition
- Board is made with 100% through hole components.
- No custom parts used in this design (all parts can be purchased through usual suspects)
- Major component designators carried over from original design so original schematics can be used.
- Jumpers and ROM configurations clearly labeled on silk screen
- Board comes jumpered for the 512k Game ROM (80% of games)
- Board comes with complete set of schematics 

Game Listing
Bad Cats, opslaan Banzai Run, Big Guns, Black Knight 2000, Cyclone, Earthshaker, Elvira and the Party Monsters, F14 Tomcat, Fire!, Jokerz, Millionaire, Mousin Around, Pinbot, Police Force, Space Station, Swords of Fury, Taxi, Transporter, Whirlwind

MPU011A/B  -  EUR 315
(incl. microprocessor 2x EUR 325)

this product is in stock

Levering

Excl. microprocessor 2x 315,00 EUR Incl. microprocessor 2x €325,00 EUR

Compatible with most Williams System 11 and Data East alphanumeric pinball games.  See game listing below to see which games this supply will work
This board is a direct plug in replacement for the original OEM  power supply.  The original power supplies that this board replaces are  Data East part number 520-5000-00  and Williams part numbers D-8345-xxx (where xxx is the game number).

Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new (not 15+ year old) components and PCB

Game Listing, Williams System 11
Banzai Run, Big Guns, Cyclone (note, I have found very few Cyclones that need a jumper moved), F-14 Tomcat, Fire!, Grand Lizard, High Speed, Millionaire, Pinbot, Road Kings, Space Station, Swords of Fury.

Game Listing, Data East 
ABC Monday Night Football, Back to the Future, Laser War, Phantom of the Opera, Playboy 35th Anniversary, Robocop, Secret Service, The Simpsons Time Machine, Torpedo Alley.

WDP011A  -  EUR 89

this product is in stock

Benefits over the original Williams board
- Williams WPC type mounting holes for ease of install / uninstall.
- No batteries required for memory retention (no acid damage, ever!)
- Simplified driver design using logic level FETs
- Beefed up switch matrix drive for better durability (good to 100V back drive)

In addition
- Board is made with 100% through hole components.
- No custom parts used in this design (all parts can be purchased through usual suspects)
- Major component designators carried over from original design so original schematics can be used.
- Jumpers and ROM configurations clearly labeled on silk screen
- Board comes jumpered for the 512k Game ROM (80% of games)
- Board comes with complete set of schematics 

Game Listing
Bugs Bunny Birthday Ball, Diner, Dr. Dude (System 11 version), Game Show,  Pool Sharks, Radical, Riverboat Gambler, Roller Games

MPU011C  -  EUR 269
(incl. microprocessor EUR 275)

this product is in stock soon

Levering

Excl. microprocessor 269,00 EUR Incl. microprocessor 275,00 EUR

Power Supply compatible with most Williams System 11B and all Williams System 11C alphanumeric pinball games.  See game listing below to see which games this supply will work. 
This board is a direct plug in replacement for the original OEM  power supply.  The original power supply that this board replaces is  Williams part number D-12246-xxx (where xxx is the game number).

Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new (not 15+ year old) components and PCB

Game Listing, Williams System 11
Bad Cats, Black Knight 2000, Bugs Bunny Birthday Ball, Diner, Dr Dude, Earthshaker, Elvira and the Party Monsters, Game Show, Jokerz, Mousin Around, Police Force, Pool Sharks, Radical, River Boat Gambler, Rollergames, Taxi, Transporter, Whirl Wind

WDP011C  -  EUR 89

this product is in stock

Our WPS079 is a direct plug in replacement for the original Williams System 7 and System 9  pinball power supplies. 

Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new (not 15+ year old) components and PCB

Game Listing
Barracora, Black Knight, Comet, Cosmic Gunfight, Defender, Firepower 2, Hyperball, Joust, Jungle Lord, Laser Cue, Pharaoh, Solar fire, Sorcerer, Space Shuttle, Starlight, Time Fantasy, Varkon, Warlock.

WPS079  -  EUR 89

this product is in stock

 WPS346 is a direct plug in replacement for the original Williams System 3, 4 & 6 pinball power supplies.  The original power supply  that this board replaces is Williams part numbers xxxxxxxx.

Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new (not 15+ year old) components and PCB

WPS346  -  EUR 85

this product is in stock

This is a direct plug in replacement for the original Twilight Zone clock board.  The original clock board is Bally / Williams part numbers A-16220 and A-16219.

Key Benefits
- Hot burning bulbs replaced with cool burning LED's
- Single board construction eliminates board-2-board contact issues
- All new (not 15+ year old) components and PCB

CLK001 - EUR 79

this product is in stock

Our FLP001 is newly designed and manufactured direct plug in replacement for the original Bally / Williams Type 2 flipper board.  The original Type 2 Flipper Board is Bally / Williams part number xxx-xxxx-xxx

Key Benefits
- All new (not 15+ year old) components and PCB

FLP001 - EUR 17,50

this product is in stock

Our SSC001 is newly designed and manufactured direct plug in replacement for the original Bally Scared Stiff Crate Board.  The original  board is Bally / Williams part number xxx-xxxx-xxx

Key Benefits
- All new (not 15+ year old) components and PCB

SSC001 - EUR 35

this product is in stock

Universal flipper board that works in all Data East / Sega pinball games that used a flipper board.  With a simple DIP switch setting, the board is customized to your specific game title.

This board is a direct plug in replacement for the original OEM  flipper board. The original flipper boards that this board replaces are Data East part numbers: 520-5033-00,  520-5033-03, 520-5070-00, 520-5076-00, and 520-5080-00

Key Benefits
- Consolodates 5 different designs into one!
- 100% new, commercially available, through-hole components
- Simplified one-shot flipper section
- Game listing / selection included on easy to read silk screen

Game Listing
Back to the Future,Batman, Batman Forever,Baywatch, Checkpoint, Frankenstein, Guns & Roses, Hook, Jurassic Park, Last Action Hero, Lethal Weapon 3, Maverick, Phantom of the Opera, RoboCop, Rocky & Bullwinkle, Star Trek 25th, Star Wars, Tales From the Crypt, Teenage Mutant Ninja Turtles, The Simpsons, Tommy, WWF Royal Rumble

FLP023 - EUR 85

this product is in stock

Compatible with most Williams System 11 and Data East alphanumeric pinball games.  See game listing below to see which games this supply will work
This board is a direct plug in replacement for the original OEM  power supply.  The original power supplies that this board replaces are  Data East part number 520-5000-00  and Williams part numbers D-8345-xxx (where xxx is the game number).

Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new (not 15+ year old) components and PCB

Game Listing, Williams System 11
Banzai Run, Big Guns, Cyclone (note, I have found very few Cyclones that need a jumper moved), F-14 Tomcat, Fire!, Grand Lizard, High Speed, Millionaire, Pinbot, Road Kings, Space Station, Swords of Fury.

Game Listing, Data East 
ABC Monday Night Football, Back to the Future, Laser War, Phantom of the Opera, Playboy 35th Anniversary, Robocop, Secret Service, The Simpsons Time Machine, Torpedo Alley.

WDP011A  -  EUR 89

this product is in stock

Compatible with Data East small and medium (normal) dotmatrix pinball games.  See game listing below to see which games this supply will work
This board is a direct plug in replacement for the original OEM  power supply.  The original power supplies that this board replaces are  Data East part number 520-5047-00,  520-5047-01 and 520-5047-02.

Key Benefits
- High Efficiency +5V section reduces heat dissipation
- Test points added for all voltages generated on the board
- All new (not 15+ year old) components and PCB

Game Listing
Batman, Checkpoint, Guns N' Roses, Hook, Jurassic Park, Last Action Hero, Lethal Weapon 3, Rocky & Bullwinkle, Star Trek 25th Anniversary, Star Wars, Tales from the Crypt, Teenage Mutant Ninja Turtles, Tommy, WWF Royal Rumble.

DPS004  -  EUR 89

this product is in stock

Benefits over the original Data East board
- Williams WPC type mounting holes for ease of install / uninstall.
- No batteries required for memory retention (no acid damage, ever!)
- Simplified driver design using logic level FETs
- Beefed up switch matrix drive for better durability (good to 100V back drive)

In addition
- Board is made with 100% through hole components.
- No custom parts used in this design (all parts can be purchased through usual suspects)
- Major component designators carried over from original design so original schematics can be used.
- Jumpers and ROM configurations clearly labeled on silk screen
- Board comes jumpered for the 512k Game ROM (80% of games)
- Board comes with complete set of schematics 

Game Listing
Back to the Future, Batman, Batman Forever,u Baywatch, Checkpoint, Frankenstein, Guns 'N Roses, Hook, Jurassic Park, Last Action Hero, Lethal Weapon 3, Maverick, Phantom of the Opera, Playboy 35th, RoboCop, Rocky & Bullwinkle, Secret Service, Star Trek 25th Star Wars, Tales from the Crypt, Teenage Mutant Ninja Turtles, The Simpsons, Time Machine, Tommy, Torpedo Alley, WWF

MPU004  -  EUR 269
(incl. microprocessor EUR 275)

this product is in stock

Levering

Excl. microprocessor 269,00 EUR Incl. microprocessor 275,00 EUR

This board replaces Williams's display for Williams WPC089 AN games.  It is made from an advanced LED technology that was not available when the original boards were made by Data East.   We spent quite a bit of time matching the original color and brightness and are quite happy with the results.

Key Benefits
- No High Voltage Required!  These will operate with a defective +/- 100V power supply.
- No Fragile Gas Display!   This light weight LED display should last 10X longer than original displays
-  Simple design ( 10 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors 
- LEDs are made with black face to help in visual aesthetics when machine is not on
- Board comes with complete set of schematics

Game Listing
Funhouse, The Machine

DIS089  -  EUR 155

this product is in stock

This board replaces Williams's display part number D12232.  It is made from an advanced LED technology that was not available when the original boards were made by Data East.   We spent quite a bit of time matching the original color and brightness and are quite happy with the results.

Key Benefits
- No High Voltage Required!  These will operate with a defective +/- 100V power supply.
- No Fragile Gas Display!   This light weight LED display should last 10X longer than original displays
-  Simple design ( 10 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors 
- LEDs are made with black face to help in visual aesthetics when machine is not on
- Board comes with complete set of schematics

Game Listing
Bad Cats, Black Knight 2000, Diner, Earthshaker, Jokerz, Roller Games, Whirlwind

DIS240  -  EUR 155

this product is in stock

This board replaces Williams's display part number D-11610 and Data East part number 520-5014-01.  It is made from an advanced LED technology that was not available when the original boards were made by Data East. We spent quite a bit of time matching the original color and brightness and are quite happy with the results.

Key Benefits
- No High Voltage Required!  These will operate with a defective +/- 100V power supply.
- No Fragile Gas Display!   This light weight LED display should last 10X longer than original displays
-  Simple design ( 10 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors 
- LEDs are made with black face to help in visual aesthetics when machine is not on
- Board comes with complete set of schematics

Game Listing Williams 
Big Guns, Cyclone, F14 TomCat (most - check picture above as some early models were different), Fire, Space Station, Swords of Fury

Game Listing Data East
Playboy 35th, Time Machine, Torpedo Alley, Secret Service

DIS200  -  EUR 155

this product is in stock

This board replaces Williams's display for all Williams System 6a, 7 and 9 pinball games.  It is made from an advanced LED technology that was not available when the original boards were made by Data East.   We spent quite a bit of time matching the original color and brightness and are quite happy with the results.

Key Benefits
- No High Voltage Required!  These will operate with a defective +/- 100V power supply.
- No Fragile Gas Display!   This light weight LED display should last 10X longer than original displays
-  Simple design ( 10 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors 
- LEDs are made with black face to help in visual aesthetics when machine is not on
- Board comes with complete set of schematics

Game Listing
Algar, Alien Poker, Baracora, Black Knight, Comet (make sure your boards match picture above), Cosmic Gunfight, Firepower II, Jungle Lord, Laser Cue, Pharaoh, Solar Fire, Sorcerer, Star Light, Time Fantasy, Warlok

DIS079  -  EUR 169

this product is in stock

This board replaces Data East's display part number 520-5030-00.  It is made from an advanced LED technology that was not available when the original boards were made by Data East.   We spent quite a bit of time matching the original color and brightness and are quite happy with the results.

Key Benefits
- No High Voltage Required!  These will operate with a defective +/- 100V power supply.
- No Fragile Gas Display!   This light weight LED display should last 10X longer than original displays
-  Simple design ( 10 Integrated circuits, NO transistors)
- All integrated components are current technology available from most distributors 
- LEDs are made with black face to help in visual aesthetics when machine is not on
- Board comes with complete set of schematics

Game Listing
Back to the Future, Phantom of the Opera, Robo Cop, Simpsons

DIS244  -  EUR 155

this product is in stock

Game Listing
All dotmatrix games 1991-1999 exl. some Data East games

 EUR 139

this product is in stock